 |
 |
| Building the BEST kilns and dryers available anywhere |
|
|
|
Periodic Kilns for Industry and Potters
The Kilnman has developed a periodic kiln that delivers exceptional temperature uniformity and control
at a very reasonable price.
In addition delivery times are very much shorter than the industry average.
Important features for the industrial user
Simply put these kilns were designed to be less expensive, fire faster and fire without losses.
They were designed to solve the industrial producers most agrevating problems.
However, they are built very robustly to withstand the hard use expected in an industrial plant.
To examine the features in greater detailClick Here
Important features for the Potter
The Pottery Master kiln is unlike any previously available kiln for the school or small production potter.
The design is based on the best industrial design available today and represents the state-of-the-art in kiln design.
The design has been rationalized for the non-industrial user without sacrificing any of the preferred features of an industrial kiln.
The quality level of these kilns is much higher than others currently available, and their cost is much lower than industrial kilns.
It's like getting an industrial kiln at less than half the price, yet with no important compromises.
Why should you consider one of these kilns? Because these kilns were designed to solve problems such as those listed below:
- Electric kilns often require refiring when an element breaks during the fire.
- It is hard to get consistent kiln atmosphere either throughout the kiln or from one firing to the next.
- Many operators experience firing problems due to equipment failures, with industrial strength kilns these problems rarely occur.
- Do you lose product or have second quality product because the kiln does not fire the same in every part of the chamber?
- Could you benefit from a faster turn around of your kiln?
- Do you have firing defects such as cracks, warps, blisters, black core, etc.?
- Could you benefit from faster loading car type kilns?
- Do you occasionally need assistance with firing problems or firing profiles?
- Do you need to hold the kiln temperature very low for long periods of time for either drying purposes or for phase changes?
- Would you like to have automatic push button starting with NFPA rated flame safety?
- Would you benefit from controlled cooling such that it followed a predetermined cooling curve?
- Would you benefit from enclosed, powered cooling where the cooling temperatures were evenly distributed throughout the chamber?
- Do you need control over the amount of excess air entering the kiln atmosphere?
- Would you like to have full safety features including over temperature protection?
- Would you like a kiln that is heavy enough not to warp or rust through during many years of service?
An additional, important feature of the Pottery Master gas kilns is
the availability of The Kilnman to render technical assistance with the kiln and firing.
Most kilns are sold with start up and training assistance from The Kilnman included in the price.
The Pottery Master kiln is for the potter who is concerned about the cost of firing.
The kiln is designed to produce ware with lower fuel costs, lower maintenance costs, fewer production losses, and fewer refires.
Counting the cost of lost ware from bad firings, the Pottery Master can, in some cases, save enough to pay for itself in a very short time.
To examine the features of these kilns Click Here
